Specifications

Hardware 2-1
TM-H6000/H6000P Developer’s Guide
Confidential
Chapter 2
Hardware
General Specifications
Slip Printer Section
Printing Specifications
Character Specifications
Character structure in the default setting is font A.
Printing method: Serial impact dot matrix
Head wire configuration: 9-pin vertical line, wire pitch 0.353 mm (1/72 inch)
Printing direction: Bidirectional, minimum distance printing
Printing speed: Approximately 5.14 LPS (printing 40 columns per line with
17.8 CPI when the head energizing time is set to normal
mode.)
(LPS: Lines Per Second)
(CPI: Characters Per Inch)
Number of characters: Alphanumeric characters: 95
Extended graphics: 128
×
12 pages (including two space
pages)
International characters: 37
Character structure: Font A: 5
×
9 (total 270 half dots in horizontal)
Font B: 7
×
9 (total 540 dots in horizontal)
Character Size, Characters Per Line, Characters Per Inch
Character structure
Character
Size (mm)
Width
×
Height
Character Dot
Spacing
Characters Per
Line (CPL)
Characters Per
Inch (CPI)
Horizontal dots
×
Vertical dots
Font A 5
×
9 1.56
×
3.1 1 dot 45 13.3
Font B 7
×
9 1.24
×
3.1 2 half dots 60 17.8