Specifications

Appendix D-2 Definitions
Confidential
E
endorsement print mechanism —
An optional, factory-installed shuttle printer mechanism for the TM-H6000 that
allows it to print an endorsement automatically as the check is processed. This
device is abbreviated as “E/P.”
ESC/POS — EPSON’s standard command language for POS devices.
F
font A — The default font. In the TM-H6000 receipt printer, font A uses 12
x
24 dot
characters (including 2 dots of horizontal spacing); in the slip printer, font A uses
5
x
9 dot characters (including one dot of horizontal spacing).
font B — In the TM-H6000 receipt printer, font B uses 9
x
17 dot characters (including 2
dots of horizontal spacing); in the slip printer, font B uses 7
x
9 dot characters
(including 2 half dots of horizontal spacing).
H
hex dump — A test mode in which the printer prints hexadecimal numbers representing
characters and codes. Run a hex dump by opening the cover and turning on
power while holding down the
FEED
button and then closing the cover.
I
IEEE 1284 — The standard used for the TM-H6000 parallel interface. This type of interface
allows both bidirectional communications and unidirectional (“compatibility
mode”) communications.
J
JavaPOS — A vendor-independent standard for using Sun Microsystems’ Java programming
commands to support POS devices. (Compare with OPOS.)
L
LPS — Lines per second.
M
MICR — Magnetic ink character recognition. A MICR reader can recognize the type of ink
found at the bottom of checks and deposit slips.