Specifications

Installation, Printer Handling, Removing a Paper Jam 5-15
TM-H6000/H6000P Developer’s Guide
Confidential
Cleaning the Thermal Print Head
CAUTION:
After printing, the print head can be very hot. Be careful not to touch it. Also let it cool
before you clean it.
Do not damage the print head by touching it with your fingers or any hard object.
1. Open the paper roll cover.
2. Clean the thermal element (the green part) of the print head with a cotton swab moistened
with an alcohol solvent (ethanol, methanol, or IPA)
Clean the thermal head periodically (generally every three months) to maintain receipt print
quality.
.
Cleaning the MICR Mechanism
Use a moistened cleaning sheet for the MICR head.
Note:
Be sure not to use an adhesive cleaning sheet.
Cleaning frequency
Clean the MICR head every three months or 6000 passes.
Cleaning sheet
Use the following or an equivalent commercially available cleaning sheet:
PRESAT brand (KIC) “CHECK READER CLEANING CARD.”
Cleaning procedure
You can perform cleaning either in self mode or command mode. These modes are described
below.
Print head