Specifications

Installation, Printer Handling, Removing a Paper Jam 5-13
TM-H6000/H6000P Developer’s Guide
Confidential
Inserting Slip Paper
When you insert slip paper, be sure that the right side of the paper is against the right side of the
paper guide, as shown below.
Printing on Slip paper
When you turn on the power, the paper roll is selected as the print sheet as a default. The printer
is offline if the paper roll is not installed. In this case, you need to install the paper so that the
printer becomes online and you can send a command to select the slip as the print sheet.
MICR and Endorsement Printing (Factory installed options)
Reading MICR characters on personal checks
CAUTION:
Do not insert checks with staples in them. This may cause paper jams, MICR reading errors, and
damage to the MICR head.
Be sure the checks are flat, without curls, folds, or wrinkles.
Use the following procedure to read MICR characters.
User Operation Printer Operation
1Transmit
FS a 0 <00>H
Mechanically switches to MICR mode and waits
for a personal check to be inserted. The SLIP LED
blinks.
2 Insert a check
(See the illustration on the next page)
Detects the check, lights the SLIP LED, and reads
MICR characters. After reading, transmits the
reading results.
3Transmit
GS ( G 2 0 48 68
Select the back side of the check.
➀
¡
➁