Specifications

5-2 Application Development Information for OPOS Rev. A
The available NVRAM size for the TM-H6000II:
❏ ANK model: max. 384KB
❏ Multilingual model: max. 192KB
5.1.2 Supplementary Explanation of Function
5.1.2.1 LetterQuality
It is possible to change the speed and quality of a bitmap by using the XXXLetterQuality
property.
RecLetterQuality = TRUE ‘print Receipt’s bitmap in quality mode.
RecLetterQuality = FALSE ‘print Receipt’s bitmap in speed mode.
SlpLetterQuality = TRUE ‘print Slip’s bitmap in quality mode.
SlpLetterQuality = FALSE ‘print Slip’s bitmap in speed mode.
Note:
It is possible to use with receipt. But it is not possible to use with slip.
5.1.2.2 Setting of printing position by escape sequence
POS Printers support escape sequences that can be treated as printing data. The following
commands are the escape sequence command for setting of printing position.
Download Bit-image
<width>
Less than paper width.
<height>
There is a limitation
Height length
= RAM Size / width length.
*For details, please refer to
the ADG for TM-H6000II in
OPOS ADK.
High level
Store
Store bitmap to RAM by SetBitmap
method after turn on the printer.
- Available Available Select parameter
When printing
a stored
bitmap that is
used many
times, this
method is
suitable.
Print
Print stored bitmap by escape sequence
command “ESC |#B”.
Fast
NV Bit-image
<width>
Less than paper width.
<height>
There is a limitation
Height length
= RAM Size / width length
High level
Store
Store bitmap to NVRAM by TMFLogo utility
in device specific settings on the
SetupPOS utility. If store the bitmap in a
NVRAM at once, it is not necessary to
restore unless the NVRAM is deleted.
- Available Available Select parameter
When printing
a stored
bitmap that is
always used,
this method is
suitable..
(e.g. a shop
logo)
Print
Print stored bitmap by DirectIO method.
*Command : PTR_DI_PRINT_FLASH_BITMAP
Fast
Name Data Remarks
Center ESC |cA Aligns following text in the center.