Specifications

3-4 Setup Rev. A
Note:
The default setting of the ESC/POS command is “Enable.”
3.2 Setup Flow
You have to set up your printer to use it. And you can adjust some feature by customizing them.
This section describes the setup.
Normal Mode
All covers are
closed
Paper roll cover
is opened
Unit cover is
opened
Front cover is
opened
If receipt is
selected
FEED Follow ESC/POS
command
Disabled Disabled Follow ESC/POS
command
RELEASE Follow ESC/POS
command
Enabled
If slip is
selected
FEED Follow ESC/POS
command
Follow ESC/POS
command
Enabled Enabled
RELEASE Follow ESC/POS
command
Enabled
Slip insertion
waiting status
Slip ejection waiting status
All covers are
closed
Paper roll cover
is opened
Unit cover is
opened
Front cover is
opened
If receipt is
selected
FEED— ————
RELEASE—————
If slip is
selected
FEED Disabled Follow ESC/POS
command
Follow ESC/POS
command
Enabled Enabled
RELEASE Disabled Follow ESC/POS
command
Enabled