Specifications

1-6 General Information Rev. A

Note:

Kanji character spacing by default setting is 2 half dots. (Kanji character spacing can be changed by ESC/

POS command.) Printing speed for Kanji characters shown in table above is in the case of full column

printing with two-pass printing.

1.5.1.1 Paper Specifications

1. Cut sheet

Paper type:Normal paper, pressure-sensitive paper, carbon copy paper

Paper size:70 - 148 mm (W)

150 - 210 mm (L) (2.8 - 5.8”(W)

5.9 - 8.3”(L))

Copy capability and paper thickness:

• Normal paper (single-ply):0.09 to 0.2 mm (0.0035 to 0.0079 in.)

• Carbon copy paper

combination:4 sheets maximum (original + 2 copies)

• Example: one original + 2 copies,

Ambient temperature and copy capability:

Copy capability is greatly influenced by the ambient temperature, so printing must be

performed under the conditions described in the table below.

Backing paper: 0.07 to 0.12 mm (0.0028 to 0.0047 in.)

Copy and original: 0.04 to 0.07 mm (0.0016 to 0.0028 in.)

Carbon paper: Approximately 0.035 mm (0.0014 in.)

Total thickness: 0.09 to 0.31 mm (0.0035 to 0.0122 in.)

Original paper 0.04 mm

Carbon paper 0.07 mm (0.035 mm

2 sheets)

Copy paper 0.04 mm

Backing paper 0.07 mm

Total thickness 0.22 mm (0.0087 in.)

Relationship between ambient temperature and number of copies

Number of copies Ambient temperature

Original + 3 copies 10 to 40

C (50 to 104

Original + 1 copy 5 to 45

C (41 to 113