Specifications

Rev. A General Information 1-5
TM-H6000II Technical Reference Guide
1.5 Printing and paper Specifications
1.5.1 Slip Section
Temperature
Operating:5 to 45 °C {41 to 113 °F}
Storage: –10 to 50 °C {14 to 122 °F} (except for paper and ribbon)
Humidity 10 to 90%
Weight (mass) Approximately 5.8 kg {12.76 lb}
Printing method: Serial impact dot matrix
Head wire
configuration:
9-pin vertical line, 0.353 mm {1/72-inch} wire pitch
Printing direction: Bidirectional, minimum distance printing
Printing speed Approximately 5.14 LPS (printing 40 columns per line with 17.8 CPI
when the head energizing time is set to normal mode.)
Number of characters: Alphanumeric characters: 95
International characters: 37
Extended graphics: 128
×
12 pages (including two space pages)
Multilingual character model supports printing with one of the
following character sets:
Simplified Chinese (GB2312): 7580
Traditional Chinese (Big 5): 13494
Character structure Font A: 5
×
9 (total 270 dots horizontally)
Font B: 7
×
9 (total 540 half dots horizontally)
Kanji: 16
×
16 (two-pass printing font)
Characters per line Refer to “Character size and print speed.”
Characters per inch Refer to “Character size and print speed.”
Character size and print speed
Font
Character
structure
(horizontal dots
×
vertical dots)
Character
spacing
Characte
rs
per inch
Character
s
per line
Character
size
(width×heigh
t)
A
(default)
5 × 9 1 dot 13.3 45 1.56 × 3.1
mm
B7 × 9 2 half-dots 17.8 60 1.24 × 3.1
mm
Kanji 16 × 16 2 half-dots 13.0 30 2.7 × 2.9 mm