TM-H6000II with Image Scanner User’s Manual / Bedienungsanleitung Gebruikershandleiding / Manuel d’utilisation Manual do utilizador / Manual del usuario Manuale dell’utente 401468100
This TM-H6000II with Image Scanner printer combines slip, impact, and two-color thermal printing with the new image scanner function. The image scanner can digitize a check image, which offers you an efficient method of check processing.
English All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. No patent liability is assumed with respect to the use of the information contained herein.
English Safety Precautions This section presents important information intended to ensure safe and effective use of this product. Read this section carefully, and store it in an accessible location. WARNING: Shut down your equipment immediately if it produces smoke, a strange odor, or unusual noise. Continued use may lead to fire. Immediately unplug the equipment, and contact your dealer or a SEIKO EPSON service center for advice. Never attempt to repair this product yourself.
English Caution Labels WARNING: Do not connect a telephone line to the drawer kick-out connector or the display module connector; otherwise, the printer and the telephone line may be damaged. CAUTION: The thermal head and paper feed motor for the thermal section are hot. Purpose of This Manual This manual provides information to operators of the TM-H6000II with Image Scanner to describe basic operations to enable safe and correct use of the printer.
English Power Switch Cover You can use the enclosed power switch cover to make sure that the power switch is not accidentally pressed. Just press the cover into place to install it. WARNING: If an accident occurs when the power switch cover is attached, immediately unplug the power supply cable to avoid fire. Installing the Roll Paper Note: Do not use paper rolls that have the paper glued or taped to the core because they might cause a paper jam.
English Installing the Ribbon Use the EPSON ERC-32. The use of any ribbon cassettes other than those approved by EPSON may damage the printer and will void the warranty. 1. Turn on the printer. Turn the knob on the ribbon cassette. Open the front cover of the printer, and insert the new ribbon. 2. Turn the knob 2 or 3 times, and check the ribbon position. Inserting Slip Paper Note: Be sure that the slips are flat, without curls, folds, or wrinkles.
English Troubleshooting Error light on or blinking. ❏ The print head temperature may be extremely high. Wait until the print head cools and the printer resumes printing automatically. ❏ Make sure that the roll paper and unit cover are properly closed. ❏ Turn off the printer, and check for a paper jam. ❏ The autocutter may be jammed. See the description below. ❏ Turn off the power, wait several seconds, and then turn it on again. If the error remains, contact your qualified service person.
English Be sure that the printer is turned off. Open the roll paper cover and clean the thermal element (the green part) of the thermal print head with a cotton swab moistened with an alcohol solvent (ethanol, methanol, or IPA). Clean the thermal print head periodically (generally every 3 months) to maintain receipt print quality. .
English • • • • An extremely large variation in the density and color tone of the background of a check. Many folds or wrinkles in a check. Exposure of the image scanning part of the printer to strong sunlight. A foreign object, such as sand, entering the printer and scratching the glass surface of the scanner. CAUTION: Do not insert checks with staples in them. This may cause paper jams, MICR reading errors, and damage to the MICR head. Be sure the checks are flat, without curls, folds, or wrinkles. 1.
English Use the following or an equivalent commercially available cleaning sheet: PRESAT brand (KIC) “CHECK READER CLEANING CARD” Note: Be sure not to use an adhesive cleaning sheet. Follow the steps below: 1. Load roll paper in the printer, turn off the power, then open the roll paper cover and turn the power back on while holding down the RELEASE button. 2. Press the RELEASE button 7 times, then close the roll paper cover.
English Note: Be sure to turn on the power before installing a ribbon cassette. 1. Turn the ribbon cassette knob. Then open the unit cover. 2. Inside the printer, push the levers backward to open the unit. Note: Do not open the unit during printing. 3. Insert the ribbon and turn the knob again to seat the ribbon; then close the printer. Cleaning the Scanner The glass part of the scanner may become dirty due to ink or paper dust, which can decrease the image quality.
English Note: Do not use any liquid, such as alcohol, benzine, or water. glass part TM-H6000II Specifications Print method Print font Columns Character size (W × H) Character sets Print speed Paper dimensions Paper thickness Copy capability Thermal paper type Inked ribbon Receipt: Thermal line, 180 dpi × 180 dpi Slip: 9-pin serial impact dot matrix Endorsement: 8-pin shuttle impact dot matrix (dpi: dots per inch [number of dots per 25.
English TM-H6000II Specifications Ribbon life Interface (compatible) Data buffer D.K.D. function Power supply Current consumption Temperature Humidity Reliability Overall dimensions Mass Slip: Purple: 6 million characters, Black: 4 million characters Endorsement: Purple: 1 million characters, Black: 800,000 characters RS-232/IEEE 1284 Bidirectional Parallel Selectable for 45 bytes or 4 KB using DIP switch 2 drives +24 VDC ± 10% Slip: Approximately 1.7 A (mean) Receipt: Approximately 1.
