Specifications

Chapter 4 Handling
99
4
Installing and Replacing Paper
Inserting Slip Paper
1
Turn on the printer.
2
Insert the paper face up with the right paper edge against the right side
of the paper guide, and insert it as far as it will go.
WARNING
• Do not open the roll paper cover and receipt unit during printing/autocutting.
The printer may be damaged.
• Do not touch the manual cutter with your hands.
The manual cutter blade is sharp and may cause injury.
Use paper that meets the printer specifications. For details about paper specifications, see
"Paper Specifications" on page 28.
• Do not insert checks that have clips or staples. This may cause paper jams.
• The paper must be flat, without curls, folds, or wrinkles.
For models with the MICR reader, MICR reading is available by inserting the check paper
so that the MICR characters on the paper are on the right side.