Specifications
60
Connecting the Ethernet interface cable
Connect a 10/100BASE-T cable to the 10/100BASE-T LAN connector by pressing firmly until the
connector clicks into place.
CAUTION
• When LAN cables are installed outdoors, make sure devices without proper surge
protection are cushioned by being connected through devices that do have surge
protection.
Otherwise, the devices can be damaged by lightning.
• Never attempt to connect the customer display cable, drawer kick-out cable, or a
standard telephone line cable to the 10/100BASE-T LAN connector.
To use the Ethernet interface, the IP Address Setup Utility for UB-E02 is required. For
detailed information about the setup methods, see the UB-E02 Technical Reference Guide.
You can obtain the IP Address Setup Utility for UB-E02 and the UB-E02 Technical
Reference Guide from one of the following URLs or ask your dealer:
• For customers in North America, go to the following web site:
http://www.epsonexpert.com/
• For customers in other countries, go to the following web site:
http://www.epson-pos.com/
016(146'.'%1//70+%#6+1075'
-'+06'.'(10#05%*.755/
10/100BASE-T LAN
interface connector
LED
(Green)
LED
(Yellow)
Switch
Press down the switch for a
while when the power is on to
initialize to the factory settings.