Specifications

48
For Parallel Interface
DIP Switch Bank 1
DIP Switch Bank 2
SW Function ON OFF
Initial
setting
1-1 Auto line feed Always enabled Always disabled OFF
1-2 Receive buffer capacity 45 bytes 4 KB OFF
1-3 ∼
1-8
Reserved Fixed to OFF OFF
SW Function ON OFF
Initial
setting
2-1 Handshaking (BUSY condition) Receive buffer full
• Offline
• Receive buffer full
OFF
2-2 Reserved Fixed to OFF OFF
2-3 ∼
2-4
Selects print density
See "Selecting the Print Density (DIP
Switches 2-3/2-4)" on page 51.
OFF
2-5 ∼
2-7
Reserved Fixed to OFF OFF
2-8 IF pin 31 reset signal Fixed to ON ON
For DIP switch 2-1 (BUSY condition), see also "Selecting the BUSY Status" on page 52.