Specifications

26
Receipt printing
dpi: dots per inch
*1: When the printer prints with the standard print density level at 24V and 25°C {77°F}.
*2: Initial setting. Programmable by commands.
80 mm {3.15"} width paper printing 58 mm {2.28"} width paper printing
Printing method Thermal line printing
Dot density 180 × 180 dpi
Printing direction Unidirectional with friction feed
Maximum print speed*
1
300 mm/s {11.81"/s}
Printing width 72.0 mm (2.83"), 512 dots 50.8 mm (2.0"), 360 dots
Characters per line Font A (initial setting): 42
Font B: 56
Font A (initial setting): 30
Font B: 40
Character spacing*
2
Font A (initial setting): 0.28 mm (2 dots)
Font B: 0.28 mm (2 dots)
Paper feed speed Approx. 200 mm/s {7.87"/s} (during continuous printing)
Line spacing*
2
Approx. 4.23 mm {1/6"}
• When changing the paper width, you need to install the optional 58 mm paper guide
(PG-58II) and to change the setting for the paper width with the customized value. To
change the paper width, see "Changing the Paper Width" on page 44.
• Because some parts of the print head and the autocutter contact the platen and they
may become worn out in 58 mm printing, once you change the paper width from 80 mm
to 58 mm, you cannot change it back to 80 mm.
Printing speed may be slower, depending on such items as the data transmission speed.