Specifications

Chapter 1 Product Overview
19
1
Error Status
When an error occurs, the printer stops operating, goes offline, and the Error LED flashes.
There are three possible error types: automatically recoverable errors, recoverable errors, and
unrecoverable errors.
Automatically Recoverable Errors
Printing is no longer possible when automatically recoverable errors occur. They can be
recovered easily, as described below.
Recoverable Errors
Printing is no longer possible when recoverable errors occur. They can be recovered easily by
turning the power off and then on again or sending an error recovery command from the driver
after eliminating the cause of the error.
Error Error description
Error LED flash code
Recovery measure
Print head
temperature
error
A high temperature
outside the head drive
operating range was
detected.
Recovers automatically
when the print head
cools.
Error Error description
Error LED flash code
Recovery measure
Autocutter error Autocutter does not
work correctly.
Remove the jammed
paper or foreign matter
in the printer, close the
roll paper cover, send
the error recovery
command, or turn the
power off and on to
recover.
Carriage
detection error
in endorsement
printing
The carriage is
malfunctioning due to
a paper jam, or the slip
removal cannot be
detected.
Approx.
320 ms
Approx.
320 ms
5,120 ms