Specifications

114
Slip Paper
You can use thicker slip paper with the TM-H6000IV than with the TM-H6000III. You can also
use copy paper for endorsement printing with the TM-H6000IV.
Bar codes
With the TM-H6000IV, printing the following bar codes and two-dimensional symbols is
additionally possible.
•GS1-128
•GS1 DataBar Omnidirectional
•GS1 DataBar Truncated
•GS1 DataBar Stacked
•GS1 DataBar Stacked Ominidirectional
•GS1 DataBar Limited
•GS1 DataBar Expanded
•GS1 DataBar Expanded Stacked
•MaxiCode
•Composite Symbology
Tone
With the TM-H6000IV, graphics tone setting (monochrome/multi-tone) is possible.
Interface
The USB interface is added to the main unit of the TM-H6000IV serial or parallel interface
models as standard equipment.
TM-H6000IV TM-H6000III
Thickness of normal paper (single-ply)
0.09 ∼ 0.22 mm 0.09 ∼ 0.20 mm
Total thickness of copy paper (slip)
0.09 ∼ 0.47 mm 0.09 ∼ 0.31 mm
Total thickness of copy paper (endorsement)
0.09 ∼ 0.31 mm Not available
Copy capability is greatly influenced by the ambient temperature, so printing must be
performed under the specified conditions. (See "Paper Specifications" on page 28.)