Specifications

Confidential

SHEET

NO.

SHEET

REVISION

TITLE

TM-H5000II

IIII

II series

Specification

(STANDARD)

3.6 Hexadecimal Dumping

1) Hexadecimal dumping function

This function prints the data transmitted from the host computer as hexadecimal numbers

and their corresponding characters.

2) Starting hexadecimal dumping

Open the cover and turn the power on while pressing the FEED button or executing GS ( A

command, then close the cover. The printer first prints "Hexadecimal Dump" on the paper

roll and prints the received print data in hexadecimal numbers and their corresponding

characters.

NOTES: 1. If no characters correspond to the data received, the printer prints "."

2. During hexadecimal dumping, any commands other than DLE EOT, DLE ENQ,

and DLE DC4 do not function.

3. You can print data that is insufficient to fill the last line by setting the printer

offline.

3) Ending hexadecimal dumping

Hexadecimal dumping ends by turning the power off, pressing the FEED button three times,

or resetting the printer after printing has finished.

Hexadecimal Dump

To terminate hexadecimal dump,

press FEED button three times.

1B 21 00 1B 26 02 40 40 1B 69 . ! . .

. i

1B 25 01 1B 63 34 00 1B 30 31 .

. . c 4 . . 0 1

41 42 43 44 45 46 47 48 49 4A

HI J

*** completed ***