Specifications

Confidential
SHEET
69
NO.
SHEET
REVISION
I
TITLE
NEXT
70
TM-H5000II
IIII
II series
Specification
(STANDARD)
Blinking: Slip insertion waiting state
Figure 3.4.2
Blinking: Slip removal waiting state / Personal check removal waiting state
(when the printer is used with the MICR reader)
Figure 3.4.3
Blinking: Personal check insertion waiting state (when the printer is used with the
MICR reader)
Figure 3.4.4
3.4.2 Receipt
1) Power (POWER) LED: Green
On: Power is stable.
Off: Power is not stable.
2) Error (ERROR) LED: Red
On: Offline (except during paper feeding using the FEED button and during
test printing.)
Off: Normal condition
Blinking: Error (refer to Section 3.7)
3) Paper roll end (PAPER OUT) LED: Red
On: The paper roll near end or paper end of the receipt is detected.
Off: Paper is loaded (normal condition)
Blinking: Self-test standby state (refer to Section 3.5.3) or macro standby state when
the macro execution command is used.
[Units: ms]
Approximately 160
[Units: ms]
Approximately 2080 Approximately 160
[Units: ms]
Approximately 1760 Approximately 160
J