Specifications

Confidential

SHEET

NO.

SHEET

REVISION

TITLE

TM-H5000II

IIII

II series

Specification

(STANDARD)

3.3 Switches and Buttons

3.3.1 Power Button

The power button, (a rocker switch) located on the lower left front of the printer, turns the power on

or off.

NOTE: Turn on the power only after connecting the power supply.

3.3.2 Panel Buttons

There are panel buttons on both the slip and receipt sections. All the panel buttons are disabled by

ESC c 5.

3.3.2.1 Slip

1) RELEASE button (non-locking push button)

[Function] Releases paper

2) REVERSE button (non-locking push button)

[Function] Reverses paper feeding for the line spacing set by ESC 2 and ESC 3

3) FORWARD button (non-locking push button)

[Function] Feeds paper for the line spacing set by ESC 2 and ESC 3

Paper feed is not executed without paper.

NOTE: When the printer cover is open, the REVERSE/FORWARD will not operate.

3.3.2.2 Receipt

FEED button: Non-locking push button

[Function] • If you push this button once and release it, the printer feeds paper for one line,

based on the line spacing set by ESC 2 and ESC 3. However, paper cannot be fed

using the FEED button under the following conditions:

① The paper roll end sensor detects a paper end.

② The printer cover is open.

• If you push this button when the printer is in the macro execution standby

state, the defined macro is executed.

• During self-test printing, you can stop the self test temporarily by pressing

this button and restart it by pressing the button again.