Specifications

CONFIDENTIAL
SHEET
19
NO.
SHEET
REVISION
I
TITLE
NEXT
20
TM-H5000II
IIII
II series
Specification
(STANDARD)
2. CONFIGURATION
2.1 Interfaces
2.1.1 RS-232 Serial Interface
2.1.1.1 Specifications
Data transmission: Serial
Synchronization: Asynchronous
Handshaking: DTR/DSR or XON/XOFF control
Signal levels: MARK = -3 to -15 V: Logic "1"
SPACE = +3 to +15 V: Logic "0"
Stop bits: 1 or more
Connector (printer side): Female DSUB-25 pin connector
The handshaking data, word length, baud rate, and parity depend on the DIP switch settings.
(Refer to Section 3.3.3.) The stop bit for the printer side is fixed to 1.
2.1.1.2 Switching between online and offline
The printer does not have an online/offline switch. The printer goes offline:
1) Between when the power is turned on (including reset using the interface) and when the
printer is ready to receive data.
2) During the self-test.
3) When the cover is open (the cover for the paper sheet selected by ESC c 0).
4) During paper feeding using the paper FEED switch.
5) When the printer stops printing due to a paper-end (only when the paper roll is not
present).
6) When an error has occurred.