Specifications

Confidential
SHEET
15
NO.
SHEET
REVISION
I
TITLE
TM-H5000II
IIII
II series
Specification
(STANDARD)
NEXT
16
1.3.2 Electrical Characteristics
1) Supply voltage: +24 VDC ± 10% (optional power supply: EPSON PS-170)
Ripple voltage: 300 mVpp or less
(only when the printer is used with the MICR reader)
2) Current consumption (at 24V except for drawer kickout driving)
Slip: Operating: Mean: Approximately 1.9A
(Character font A α-N all columns printing)
Peak: Approximately 8.0A (20 ms)
When the print platen is released: 2.0A (200 ms)
Receipt: Operating: Mean: Approximately 1.7A
(Character font A α-N all columns printing)
Peak: Approximately 7.7A
Low power consumption mode:
Mean: Approximately 1.2A
(Character font A α-N all columns printing)
Peak: Approximately 6.6A
Standby: Mean: Approximately 0.3A
1.3.3 EMI and Safety Standards Applied
EMC is measured using optional SEIKO EPSON’s AC adapter.
1) Europe CE marking:
Directive: 89/336/EEC
EN55022 Class B
EN55024
IEC6000-4-2
IEC6000-4-3
IEC6000-4-4
IEC6000-4-5
IEC6000-4-6
IEC6000-4-8
IEC6000-4-11
Directive: 90/384/EEC
EN45501
Safety Standards: EN 60950
2) North America EMI: FCC/ICES-003 Class A
Safety standards: UL1950/CSA C22.2 No.950
3) Japan EMC: VCCI Class A
4) Oceania EMC: AS/NZS 3548
Conditions of Acceptability
1) This component has been judged on the basis of the required spacing in the Standard for
Information Technology Equipment, Including Electrical Business Equipment, UL 1950 and
CSA C22.2 No. 950, Sub-clause 2.9, which would cover the component itself if submitted for
Listing.
2) This unit is intended to be supplied by a SELV circuit only.
3) The terminals and connectors have not been evaluated for field wiring.
4) Interface connectors (DK, DM-D) are not intended for TNV connection.