Specifications

Confidential
SHEET
14
NO.
SHEET
REVISION
I
TITLE
TM-H5000II
IIII
II series
Specification
(STANDARD)
NEXT
15
1.2.7 Printing and Cutting Positions
Paper feed direction
[ Units: mm (All the numeric values are typical.) ]
Center of the print dotline
Auto-cutter blade position
Manual-cutter position
14.8
26.3
Figure 1.2.3 Printing and Cutting Positions
NOTE: Numeric values used here are typical values; the values may vary slightly as a result of
paper slack or variations in the paper. Take the notice into account when setting the
cutting position of the autocutter.
1.3 General Section (for both Receipt and Slip)
1.3.1 Internal Buffer
1) Receive buffer selectable as 45 bytes or 4 KB using the DIP switch.
2) User-defined buffer (both for user-defined characters and user-defined bit images)
Receipt : 12 KB Slip: 3 KB
3) Macro buffer 2 KB
4) NV (non-volatile) bit image buffer 384 KB
5) User NV (non-volatile) memory 1 KB
Approx. 29
Approx. 15