Specifications

Confidential
SHEET
13
NO.
SHEET
REVISION
I
TITLE
TM-H5000II
IIII
II series
Specification
(STANDARD)
NEXT
14
1.2.6 Printable Area
1) Paper roll
The printable area of paper with a width of 79.5 ± 0.5 mm {3.13 ± 0.02"} is 72.2 ± 0.2 mm
{2.84 ± 0.008"} (512 dots) and the space on the right and left sides is approximately
3.7 ±2 mm {0.15 ± 0.079"}.
a
b
c
de
Figure 1.2.1 Printable Area of Paper Roll
NOTE: The print position within the printable area of the thermal elements for dots 257 to 512 is
shifted approximately 0.07 mm {0.003"} in the paper feed direction from the position for
dots 1 to 256. Be sure not to print a ladder bar code across both printable areas, as this
can cause variations in printing which are difficult to read. However, when the ladder bar
code is printed with level 2 of print density, the difference is only approximately 0.04 ∼ 0.05
mm {0.0015∼0.0019"}.
Approximately 0.07mm (0.0028")
1 256
257 512
Figure 1.2.2 Shifting of the Print Position
a = 79.5 ± 0.5 mm {3.13 ± 0.02"}
b = 1. 41 ± 0.05 mm {.056 ± .002"}
c = 72.2 ± 0.2 mm {2.84 ± .008"}
d = 3.7 ± 2 mm {0.15 ± 0.079"}.
e = 3.7 ± 2 mm {0.15 ± 0.079"}.
[All the numeric values are typical.]
Approximately 0.07 mm {0.0028"}