Specifications

Confidential
SHEET
10
NO.
SHEET
REVISION
I
TITLE
TM-H5000II
IIII
II series
Specification
(STANDARD)
NEXT
11
1.2 Receipt Section
1.2.1 Printing Specifications
1) Printing method: Thermal line printing
2) Dot density: 180 dpi × 180 dpi. (dpi: dots per 25.4 mm {1"})
3) Printing direction: Unidirectional with friction feed
4) Printing width: 72 mm {2.83"}, 512 dot positions
5) Characters per line: Font A: 42 (default)
Font B: 56
6) Character spacing: Font A: 0.28 mm {.01"} (2 dots) (default)
Font B: 0.28 mm {.01"} (2 dots)
Programmable by control commands.
7) Printing speed: High speed mode:
120 mm/s {4.72"/s} maximum
38 lps maximum
(computed value for 3.18 mm {1/8"} feed)
28.4 lps maximum
(when 4.23 mm {1/6"} paper feeding)
(at 24V, 28°C {82.4°F}, Density level 2. Speeds are
switched automatically depending on the voltage
applied to the printer and head temperature
conditions.)
Low power consumption mode:
Approximately 16.5 lps
(when 4.23 mm {1/6"} paper feeding)
(lps: lines per second)
Approximately 70 mm/s {2.76"/s}
When a ladder bar code is printed:
Approximately 42 mm/s {1.7"/s}
NOTES: • Printing speed may be slower depending on the data transmission speed
and the combination of control commands.
• Low transmission speed may cause intermittent printing. It is
recommended to transmit data to the printer as quickly as possible.
• High speed mode or low power consumption mode is selected by a DIP
switch. (Refer to Table 3.3.4 or 3.3.7).
8) Paper feed speed: Approximately 120 mm/s
(approximately 4.72"/s) (continuous paper feeding)
9) Line spacing (default): 4.23 mm {1/6"}
Programmable by control commands.