Specifications

Confidential
SHEET
206
NO.
SHEET
REVISION
I
TITLE
TM-H5000II
IIII
II series
Specification
(STANDARD)
NEXT
207
• Data transmission (real-time commands and the like) should not be executed
during MICR reading, because it affects the reading precision and may lower the
recognition rate.
• If the printer receives FS ( f, FS a 1, FS a 2, or FS b when the MICR function is still
enabled after reading, the printer executes each command. If the printer receives
any other code (except real-time commands), the printer ejects the check, ends
the MICR function, and selects the paper roll.
[Notes] • The printer transmits all data collectively without confirming whether the host is
ready to receive data. To receive all data correctly, 67 bytes or more of space is
required in the receive buffer.
• Paper feeding with the FORWARD/REVERSE button and auto loading cannot be
executed during the period from starting MICR character reading to ending check
paper ejection. Also, do not change the ink ribbon during this period.
[Reference] DLE EOT BS, DLE EOT, DLE ENQ, DLE DC4, ESC c 0, ESC f, FS ( f, FS a 1,
FS a 2, FS b, Appendix E
FS a 1
[Name] Load check paper to print starting position
[Format] ASCII FS a 1 n
Hex 1C 61 31 n
Decimal 28 97 49 n
[Description] Loads check paper to the print starting position
[Details] • Since this command is executed after being buffered in the receive buffer, there
may be a time lag between receiving this command starting MICR reading.
• The command is ignored unless the MICR function is selected.
• After loading check paper to the print starting position, the printer cancels the
MICR function and selects slip paper automatically.
[Reference] FS a 0
FS a 2
[Name] Eject check paper
[Format] ASCII FS a 1
Hex 1C 61 32
Decimal 28 97 50
[Description] Ejects check paper
[Details] • Since this command is executed after being buffered in the receive buffer, there
may be a time lag between reception and starting paper ejection.
• The command is ignored unless the MICR function is selected.
• After ejecting check paper, the printer cancels the MICR function and selects the
paper roll.
[Reference] ESC c 0, FS a 0