Specifications

Confidential
SHEET
196
NO.
SHEET
REVISION
I
TITLE
TM-H5000II
IIII
II series
Specification
(STANDARD)
NEXT
197
FS W n
[Name] Turn quadruple-size mode on/off for Kanji characters
[Format] ASCII FS W n
Hex 1C 57 n
Decimal 28 87 n
[Range] 0 ≤ n ≤ 255
[Description] Turns quadruple-size mode on or off for Kanji characters.
• When the LSB of n is 0, quadruple-size mode for Kanji characters is turned off.
• When the LSB of n is 1, quadruple-size mode for Kanji characters is turned on.
[Details] • Only the lowest bit of n is valid.
• In quadruple-size mode, the printer prints the same size characters as when
double-width and double-height modes are both turned on.
• When quadruple-size mode is turned off using this command, the following
characters are printed in normal size.
• When some of the characters on a line are different in height, all the characters
on the line are aligned at the baseline.
• When characters are enlarged in the horizontal direction, they are enlarged to
the right, based on the left side of the character.
• FS ! or GS ! can also select and cancel quadruple-size mode by selecting
double-height and double-width modes, and the setting of the last received
command is effective.
[Default] n = 0
[Reference] FS !, GS !