Specifications

Confidential
SHEET
189
NO.
SHEET
REVISION
I
TITLE
TM-H5000II
IIII
II series
Specification
(STANDARD)
NEXT
190
FS &
[Name] Select Kanji character mode
[Format] ASCII FS &
Hex 1C 26
Decimal 28 38
[Description] Selects Kanji character mode.
[Details] For Japanese model:
• This command is effective only when the JIS code system is selected.
• When the Kanji character mode is selected, the printer processes all Kanji code
as two bytes each.
• Kanji codes are processed in the order of the first byte and second byte.
• Kanji character mode is not selected when the power is turned on.
• Using FS C, the Kanji character code system is selected.
For Simplified Chinese/Traditional Chinese model:
• When The kanji character mode is selected, the printer checks whether the code
is for Kanji or not; then processes the first byte and the second byte if the code is
for Kanji.
• Kanji codes are processed in the order of the first byte and second byte.
• Kanji character mode is not selected when the power is turned on.
[Reference] FS ., FS C
FS - n
[Name] Turn underline mode on/off for Kanji characters
[Format] ASCII FS - n
Hex 1C 2D n
Decimal 28 45 n
[Range] 0 ≤ n ≤ 2, 48 ≤ n ≤ 50
[Description] Turns underline mode for Kanji characters on or off, based on the following values
of n for both receipt and slip.
n
Function
0, 48 Turns off underline mode for Kanji characters
1, 49 Turns on underline mode for Kanji characters (1-dot thick)
2, 50 Turns on underline mode for Kanji characters (2-dot thick)
[Details] • The printer can underline all characters (including right- and left-side character
spacing), but cannot underline the space set by HT and 90° clockwise-rotated
characters.
• After the underline mode for Kanji characters is turned off by setting n to 0,
underline printing is no longer executed, but the previously specified underline
thickness is not changed. The default underline thickness is 1 dot.