Specifications

Confidential
SHEET
188
NO.
SHEET
REVISION
I
TITLE
TM-H5000II
IIII
II series
Specification
(STANDARD)
NEXT
189
6.4 Kanji Control Commands
(only for Japanese, Simplified Chinese, Traditional Chinese model)
FS ! n
[Name] Set print mode(s) for Kanji characters
[Format] ASCII FS ! n
Hex 1C 21 n
Decimal 28 33 n
[Range] 0 ≤ n ≤ 255
[Description] Sets the print mode for Kanji characters, using n as follows:
Bit Off/On Hex Decimal Function
0 - - - Undefined.
1 - - - Undefined.
2 Off 00 0 Double-width mode is OFF.
On 04 4 Double-width mode is ON.
3 Off 00 . Double-height mode is OFF.
On 08 8 Double-height mode is ON.
4 - - - Undefined.
5 - - - Undefined.
6 - - - Undefined.
7 Off 00 0 Underline mode is OFF.
On 80 128 Underline mode is ON.
[Details] • When both double-width and double-height modes are set (including right- and
left-side character spacing), quadruple-size characters are printed.
• The printer can underline all characters (including right- and left-side character
spacing), but cannot underline the space set by HT and 90° clockwise-rotated
characters.
• The thickness of the underline is that specified by FS −
−−
−, regardless of the
character size.
• When some of the characters in a line are double or more height, all the
characters on the line are aligned at the baseline.
• It is possible to emphasize the Kanji character using FS W or GS !; the setting of
the last received command is effective.
• It is possible to turn underline mode on or off using FS −
−−
−, and the setting of the
last received command is effective.
[Default] n = 0
[Reference] FS −
−−
−, FS W, GS !