Specifications

Confidential
SHEET
177
NO.
SHEET
REVISION
I
TITLE
TM-H5000II
IIII
II series
Specification
(STANDARD)
NEXT
178
The resettable maintenance counter is initialized by GS g 0.
Depending on the status of the receive buffer, there can be a time difference
between the receiving of this command and the storing of data.
[Notes] The printer sends all data without confirming whether the host PC can receive or
not after transmitting the header. Therefore, take 12 bytes or more for the empty
area in the receive buffer so that the data can be surely received from the host
PC.
[Reference] GS g 0
GS h n
[Name] Select bar code height
[Format] ASCII GS h n
Hex 1D 68 n
Decimal 29 104 n
[Range] 1 n 255
[Description] Selects the height of the bar code.
n specifies the number of dots in the vertical direction.
[Details] A bar code can be printed only in the paper roll mode.
[Default] n = 162
[Reference] GS k
GS k m d1...dk NUL
GS k m n d1...dn
[Name] Print bar code
[Format]
ASCII GS k m d1...dk NUL
Hex 1D 6B m d1...dk 00
Decimal 29 107 m d1...dk 0
ASCII GS k m n d1...dn
Hex 1D 6B m n d1...dn
Decimal 29 107 m n d1...dn
[Range]
0 m 6 (k and d depend on the bar code system used)
65 m 73 (n and d depend on the bar code system used)