Specifications
Confidential
SHEET
173
NO.
SHEET
REVISION
I
TITLE
TM-H5000II
IIII
II series
Specification
(STANDARD)
NEXT
174
GS b n
[Name] Turns smoothing mode on/off
[Format] ASCII GS b n
Hex 1D 62 n
Decimal 29 98 n
[Range] 0 ≤ n ≤ 255
[Description] Turns smoothing mode on or off.
When the LSB of n is 0, smoothing mode is turned off.
When the LSB of n is 1, smoothing mode is turned on.
[Details] • This command affects printing on a paper roll. However, the setting is always
effective.
• Smoothing mode is available for built-in, user-defined characters.
• Even if smoothing mode is turned on, smoothing is not executed when either of
character width or character height is the normal size.
• Only the lowest bit of n is valid.
[Default] n = 0
[Reference] ESC !, GS !
GS f n
[Name] Select font for Human Readable Interpretation (HRI) characters
[Format] ASCII GS f n
Hex 1D 66 n
Decimal 29 102 n
[Range] n = 0, 1, 48, 49
[Description] Selects a font for the HRI characters used when printing a bar code.
n selects a font from the following table:
n
Font
0, 48
Font A (12 × 24)
1, 49
Font B (9 × 17)
[Details] • HRI indicates Human Readable Interpretation.
• HRI characters are printed at the position specified by GS H.
• The bar code can be printed in paper roll mode only.
[Default] n = 0
[Reference] GS H, GS k