Specifications

Confidential
SHEET
172
NO.
SHEET
REVISION
I
TITLE
TM-H5000II
IIII
II series
Specification
(STANDARD)
NEXT
173
Fourth byte (paper sensor information)
Bit Off/On Hex Decimal Status for ASB
0 Off 00 0 Slip is selected.
On 01 1 Slip is not selected.
1 Off 00 0 Can print on slip.
On 02 2 Cannot print on slip.
2, 3 - - - Undefined.
4 Off 00 0 Not used. Fixed to Off.
5, 6 - - - Undefined.
7 Off 00 0 Not used. Fixed to Off.
Bit 0: Bit 0 is 1 (slip is not selected) when selecting a MICR function.
Bit 1: Bit 1 is 0 when slip is set (can print) and Bit 1 is 1 when slip ejection starts (cannot
print).
• When slip is selected and the printer waits for the slip to be inserted, bits 5 and 6
of third byte are 1 (paper not present), Bit 0 of forth byte is 0 (slip is selected) and
Bit 1 of fourth byte is 1 (cannot print on slip).
• When a printing stop for a paper end of a slip is disabled by ESC c 4, if there is
no printable area on the slip, Bit 1 of fourth byte is On (cannot print on slip).
Check if there is a printing area on the slip by using GS r 3.
[Default] n = 0 when DIP SW 2-1 is off, n = 2 when DIP SW 2-1 is on.
[Reference] DLE EOT, ESC c 4, GS r, Appendix E, Transmission Status Identification