Specifications

Confidential
SHEET
169
NO.
SHEET
REVISION
I
TITLE
TM-H5000II
IIII
II series
Specification
(STANDARD)
NEXT
170
• When the printer is disabled by ESC = (Select peripheral device), the four status
bytes are transmitted whenever the status changes.
• When using DLE EOT, GS I
II
I, or GS r, the status transmitted by these
commands and ASB status must be differentiated, according to the procedure in
Appendix E, Transmission Status Identification.
• The status items to be transmitted are as follows:
First byte (printer information)
Bit Off/On Hex Decimal Status for ASB
0 Off 00 0 Not used. Fixed to Off.
1 Off 00 0 Not used. Fixed to Off.
2 Off 00 0 Drawer kick-out connector pin 3 is LOW.
On 04 4 Drawer kick-out connector pin 3 is HIGH.
3 Off 00 0 Online.
On 08 8 Offline.
4 On 10 16 Not used. Fixed to On.
5 Off 00 0 Cover is closed.
On 20 32 Cover is open.
6 Off 00 0 Paper is not being fed by using the PAPER FEED button.
On 40 64 Paper is being fed by using the PAPER FEED button.
7 Off 00 0 Not used. Fixed to Off.
The printer is offline when the printer cover is open during non-printing.
When the printer cover is open during printing, the printer is in a recoverable error in slip mode.
When receipt is selected, the printer is in the automatic recovery error status.