Specifications

Confidential
SHEET
165
NO.
SHEET
REVISION
I
TITLE
TM-H5000II
IIII
II series
Specification
(STANDARD)
NEXT
166
• If the width set for the printing area is less than the width of one character, when
the character data is developed, the following processing is executed:
① The printing area width is extended to the right to accommodate one
character.
Printable area
A
Left margin Extended to right
Printing area width set by n
L
and n
H
② If the printing area width cannot be extended sufficiently, the left margin is
reduced to accommodate one character.
Printable area
A
Left margin ② Reduce left margin ① Extended to right
③ If the printing area width cannot be extended sufficiently, the right space is
reduced.
• If the width set for the printing area is less than one vertical line, the following
processing is executed only on the line in question when data other than
character data (e.g., bit image, user-defined bit image) is developed:
① The printing area width is extended to the right to accommodate one vertical
line for the bit image within the printable area.
② If the printing area width cannot be extended sufficiently, the left margin is
reduced to accommodate one vertical line.
• This command is effective for the paper source which is selected with ESC c 1.
[Default] Paper roll: n
L
= 0, n
H
= 2
Slip: n
L = 32, nH = 3
[Reference] ESC c 1, GS L, GS P