Specifications

Confidential
SHEET
162
NO.
SHEET
REVISION
I
TITLE
TM-H5000II
IIII
II series
Specification
(STANDARD)
NEXT
163
GS P x y
[Name] Set horizontal and vertical motion units
[Format] ASCII GS P x y
Hex 1D 50 x y
Decimal 29 80 x y
[Range] 0 ≤ x ≤ 255
0 ≤ y ≤ 255
[Description] Sets the horizontal and vertical motion units to approximately 25.4/x mm { 1/x
inches} and approximately 25.4/y mm {1/y inches}, respectively.
When x and y are set to 0, the default setting of each value is used.
[Details] • The command sets a line spacing for the paper source selected by the ESC c 1
command.
• The horizontal direction is perpendicular to the paper feed direction and the
vertical direction is the paper feed direction.
• In standard mode, the following commands use x or y, regardless of character
rotation (upside-down or 90° clockwise rotation):
① Commands using x: ESC SP, ESC $, ESC \, FS S, GS L, GS W
② Commands using y: ESC 3, ESC J, ESC K, GS V
• In page mode, the following commands use x or y, depending on character
orientation:
① When the print starting position is set to the upper left or lower right of the
printing area using ESC T (data is buffered in the direction perpendicular to
the paper feed direction):
Commands using x: ESC SP, ESC $, ESC W, ESC \, FS S
Commands using y: ESC 3, ESC J, ESC W, GS $ ,GS V, GS \
② When the print starting position is set to the upper right or lower left of the
printing area using ESC T (data is buffered in the paper feed direction):
Commands using x: ESC 3, ESC J, ESC W, GS $, GS \,GS V
Commands using y: ESC SP, ESC $, ESC W, ESC \,GS V, FS S
• The command does not affect the previously specified values.
• The calculated result from combining this command with others is truncated to
the minimum value of the mechanical pitch.
• The horizontal and vertical motion units for the paper roll can be set in 1/360
units, but the printer actually operates based on the minimum value of the
mechanical pitch (1/180).
[Default] Receipt x = 180, y = 360
Slip x = 150, y = 144
[Reference] ESC SP, ESC $, ESC 3, ESC J, ESC K, ESC W, ESC \, GS $, GS L, GS V ,GS W,
GS \, ESC c 1, FS S