Specifications

Confidential
SHEET
153
NO.
SHEET
REVISION
I
TITLE
TM-H5000II
IIII
II series
Specification
(STANDARD)
NEXT
154
GS ∗
∗∗
∗ x y d1 ... d(x ×
××
× y ×
××
× 8)
[Name] Define user-defined bit image
[Format] ASCII GS ∗ x y d1 ... d(x × y × 8)
Hex 1D 2A x y d1 ... d(x × y × 8)
Decimal 29 42 x y d1 ... d(x × y × 8)
[Range] 1 ≤ x ≤ 255
1 ≤ y ≤ 48 (when paper roll is selected)
where x × y ≤ 1536 (when paper roll is selected)
1 ≤ y ≤ 255 (when slip is selected)
where x × y ≤ 404 (when slip is selected)
0 ≤ d ≤ 255
[Description] Defines a user-defined bit image using the number of dots specified by x and y
• x specifies the number of dots in the horizontal direction.
• y specifies the number of dots in the vertical direction.
[Details] • The number of dots in the horizontal direction is x × 8; in the vertical direction it is
y × 8.
• If x × y is out of the specified range, this command is disabled.
• The d indicates bit image data. In the data (d) a bit to be printed is specified with
a 1 and a bit not to be printed is specified with a 0.
• A user-defined character and a user-defined bit image cannot be defined
simultaneously. When this command is executed, the user-defined character is
cleared.
• The downloaded bit image definition is cleared when:
① ESC @ is executed.
② ESC & is executed.
③ FS q is executed.
④ Printer is reset or the power is turned off.
• The user-defined bit image can be defined on the selected paper by the
ESC c 1.
[Reference] ESC &, ESC c 1, GS /