Specifications

Confidential
SHEET
151
NO.
SHEET
REVISION
I
TITLE
TM-H5000II
IIII
II series
Specification
(STANDARD)
NEXT
152
[Details] • When character width or height is set to 3 or more in slip mode, the printer
executes the internal flag operation, but the actual width or height printed is 2
(double-width or double-height).
• If
n
is outside the defined range, this command is ignored.
• In standard mode, the vertical direction is the paper feed direction, and the
horizontal direction is perpendicular to the paper feed direction. However, when
character orientation changes in 90° clockwise-rotation mode, the relationship
between vertical and horizontal directions is reversed.
• In page mode, vertical and horizontal directions are based on the character
orientation.
• When characters are enlarged with different sizes on one line, all the characters
on the line are aligned at the baseline.
• The ESC !, FS !, FS W command can also turn double-width and double-height
modes on or off. However, the setting of the last received command is effective.
• This command is effective for all characters (alphanumeric and Kanji) except for
HRI characters.
[Default] n = 0
[Reference] ESC !, FS !, FS W