Specifications
Confidential
SHEET
147
NO.
SHEET
REVISION
I
TITLE
TM-H5000II
IIII
II series
Specification
(STANDARD)
NEXT
148
• This command feeds dots (for the height n of the NV bit image) in normal and
double-width modes, and (for the height n × 2 of the NV bit image) in
double-height and quadruple modes, regardless of the line spacing specified by
ESC 2 or ESC 3.
• After printing the bit image, this command sets the print position to the beginning
of the line and processes the data that follows as normal data.
[References] FS q
FS q n [x
L
x
H
y
L
y
H
d1...dk]1...[x
L
x
H
y
L
y
H
d1...dk]n
[Name] Define NV bit image
[Format] ASCII FS q n [x
L
x
H
y
L
y
H
d1...dk]1...[ x
L
x
H
y
L
y
H
d1...dk]n
Hex 1C 71 n [x
L
x
H
y
L
y
H
d1...dk]1...[ x
L
x
H
y
L
y
H
d1...dk]n
Decimal 28 113 n [x
L
x
H
y
L
y
H
d1...dk]1...[ x
L
x
H
y
L
y
H
d1...dk]n
[Range] 1 ≤ n ≤ 255
0 ≤ xL
≤ 255
0 ≤ x
H
≤ 3 (when 1 ≤ (x
L
+ x
H
× 256) ≤ 1023
0 ≤ y
L
≤ 1 (when 1 ≤ (y
L
+ y
H
× 256) ≤ 288
0 ≤ d ≤ 255
k = (x
L
+ x
H
× 256) × (y
L
+ y
H
× 256) × 8
Total defined data area = 3M bits (384K bytes)
[Description] Define the NV bit image specified by n.
• n specifies the number of the defined NV bit image.
• x
L
, x
H
specifies (x
L
+ x
H
× 256) × 8 dots in the horizontal direction for the NV bit
image you are defining.
• y
L
, y
H
specifies (y
L
+ y
H
× 256) × 8 dots in the vertical direction for the NV bit
image you are defining.
[Details] • This command cancels all NV bit images that have already been defined by this
command. The printer cannot redefine only one of several data definitions
previously defined. In this case, all data needs to be sent again.
• From the beginning of the processing of this command till the finish of hardware
reset, mechanical operations (including initializing the position of the printer head
when the cover is open and paper feeding using the PAPER FEED button, etc.)
cannot be executed.
• An NV bit image is a bit image defined in non-volatile memory by
FS q and printed by FS p.
• In standard mode, this command is effective only when processed at the
beginning of the line.
• In page mode, this command is not effective.
• This command is effective when 7 bytes <FS∼yH> are processed as normal
values.
• When the amount of data exceeds the capacity left in the range defined by x
L
,
x
H
, y
L
, y
H
, the printer processes x
L
, x
H
, y
L
, y
H
out of the defined range.
Note: NV = non-volatile