Specifications

Confidential
SHEET
145
NO.
SHEET
REVISION
I
TITLE
TM-H5000II
IIII
II series
Specification
(STANDARD)
NEXT
146
• With the parallel interface mode, the data buffer capacity (which is the memory
area to store all transmitted data except ASB status) is 99 bytes. Data that
exceeds 99 bytes is ignored.
• Data stored in the user NV memory can be written by FS g 1.
• Depending on the status of the receive buffer, there can be a time difference
between the receiving of this command and the storing of data.
[Notes] • The printer transmits all data collectively without confirming whether the host is
ready to receive data. To receive all data results correctly, (the capacity of the
transmitted data + 2) bytes or more space is required in the receive buffer.
• During data transmission, the printer ignores the real-time commands. Also, the
printer does not transmit ASB even when the ABS is enabled. Therefore, the
user cannot confirm changes in the printer status during these periods.
[Reference] FS g 1