Specifications

Confidential
SHEET
140
NO.
SHEET
REVISION
I
TITLE
TM-H5000II
IIII
II series
Specification
(STANDARD)
NEXT
141
ESC p m t1 t2
[Name] Generate pulse
[Format] ASCII ESC p m t1 t2
Hex 1B 70 m t1 t2
Decimal 27 112 m t1 t2
[Range] 0 ≤ m ≤ 1, 48≤ m ≤ 49
0 ≤ t1 ≤ 255, 0≤ t2 ≤ 255
[Description] Outputs the pulse specified by t1 and t2 to connector pin m as follows:
m
Connector pin
0, 48 Drawer kick-out connector pin 2.
1, 49 Drawer kick-out connector pin 5.
[Details] • The pulse ON time is [t1 × 2 ms] and the OFF time is [t2 × 2 ms].
• If t2 < t1, the OFF time is [t1 × 2 ms]
[Reference] Section 2.2.3, Drawer kick-out connector, Appendix J
ESC q
[Name] Release
[Format] ASCII ESC q
Hex 1B 71
Decimal 27 113
[Description] Releases the paper
[Details] • This command is enabled only when processed at the beginning of a line.
• When the slip paper is selected as the paper source, the printer waits for the
paper to be removed after executing a release; then the printer selects the paper
roll.
• When the paper roll is selected as the paper source, the printer moves to the
next operation immediately after executing a release.