Specifications

Confidential
SHEET
137
NO.
SHEET
REVISION
I
TITLE
TM-H5000II
IIII
II series
Specification
(STANDARD)
NEXT
138
ESC c 5 n
[Name] Enable/disable panel buttons
[Format] ASCII ESC c 5 n
Hex 1B 63 35 n
Decimal 27 99 53 n
[Range] 0 ≤ n ≤ 255
[Description] Enables or disables the panel buttons.
• When the LSB of n is 0, the panel buttons are enabled.
• When the LSB of n is 1, the panel buttons are disabled.
[Details] • Only the lowest bit of n is valid.
• When the panel buttons are disabled, none of them are usable when the printer
cover is closed.
• In this printer, the panel buttons are the FEED, FORWARD, REVERSE, and
RELEASE buttons.
• In the macro ready mode, the FEED and REVERSE buttons are enabled,
regardless of the settings of this command; however, the paper cannot be fed by
using these buttons.
• When the cover is open, the following panel buttons are disabled regardless of
the settings of this command.
When the paper roll cover is open: FEED button is disabled.
When the front cover is open: FORWARD, REVERSE, and RELEASE
buttons are disabled.
[Default] n = 0
ESC d n
[Name] Print and feed n lines
[Format] ASCII ESC d n
Hex 1B 64 n
Decimal 27 100 n
[Range] 0 ≤ n ≤ 255
[Description] Prints the data in the print buffer and feeds n lines.
[Details] • This command sets the print starting position to the beginning of the line.
• This command does not affect the line spacing set by ESC 2 or ESC 3.
• The maximum paper feed amount is 1016 mm {40"}. If the paper feed amount (n
x line spacing) of more than 1016 mm {40"} is specified, the printer feeds the
paper only 1016 mm {40"}.
[Reference] ESC 2, ESC 3