Specifications

Confidential
SHEET
122
NO.
SHEET
REVISION
I
TITLE
NEXT
123
TM-H5000II
IIII
II series
Specification
(STANDARD)
ESC L
[Name] Select page mode
[Format] ASCII ESC L
Hex 1B 4C
Decimal 27 76
[Description] Switches from standard mode to page mode.
[Details] • This command is enabled only when processed at the beginning of a line.
• This command has no effect in page mode.
• After printing is completed by FF or by using ESC S, the printer returns to
standard mode.
• This command sets the position where data is buffered to the position specified
by ESC T within the printing area defined by ESC W.
• This command switches the settings for the following commands (in which the
values can be set independently in standard mode and page mode) to those for
page mode:
① Set right-side character spacing: ESC SP, FS S
➁ Set line spacing: ESC 2, ESC 3
• Only value settings are possible for the following commands in page mode;
these commands are not executed.
① Turn 90° clockwise rotation mode on/off: ESC V
② Select justification: ESC a
③ Turn upside-down printing mode on/off: ESC {
④ Set left margin: GS L
⑤ Set printable area width: GS W
⑥ Select blocks of print mode (for slip only): ESC !
⑦ Select character font (for slip only): ESC M
• The following command is ignored in page mode:
➀ Execute test print: GS ( A
• The following command is not available in page mode:
① Select paper: ESC c 0
② Print non-volatile bit image: FS P
③ Define non-volatile bit image: FS q
④ Write to user NV memory: FS g 1
⑤ Initialize maintenance counter: GS g 0
• The printer returns to standard mode when power is turned on, the printer is
reset, or ESC @ is used.
• In page mode for slip, font C is automatically selected regardless of the font
selection with the commands.
• In page mode for slip, emphasis and double-stick printing cannot be performed.
[Reference] FF, CAN, ESC FF, ESC @, ESC S, ESC T, ESC W, GS $, GS \, 3.12 Page Mode