Specifications

Confidential
SHEET
115
NO.
SHEET
REVISION
I
TITLE
NEXT
116
TM-H5000II
IIII
II series
Specification
(STANDARD)
ESC ? n
[Name] Cancel user-defined characters
[Format] ASCII ESC ? n
Hex 1B 3F n
Decimal 27 63 n
[Range] 32 ≤ n ≤ 126
[Description] Cancels user-defined characters.
[Details] • This command cancels the pattern defined for the character code specified by n.
After user-defined characters are canceled, the corresponding pattern for the
internal characters are printed.
• This command deletes the pattern defined for the specified code in the font
selected by ESC ! or ESC M.
• If a user-defined character has not been defined for the specified character
code, the printer ignores this command.
• This command deletes the pattern defined for the paper selected by ESC c 1.
[Reference] ESC &, ESC %, ESC c 1
ESC @
[Name] Initialize printer
[Format] ASCII ESC @
Hex 1B 40
Decimal 27 64
[Description] Clears the data in the print buffer and resets the printer mode to the mode that was
in effect when the power was turned on.
[Details] • The DIP switch settings are not checked again.
• The data in the receive buffer is not cleared.
• The macro definition is not cleared.
• When this command is executed in slip mode, the printer ejects the slip and
selects the paper roll.
• The non-volatile bit image data is not cleared.
• The data for the user NV memory is not cleared.