Specifications

Confidential
SHEET
112
NO.
SHEET
REVISION
I
TITLE
NEXT
113
TM-H5000II
IIII
II series
Specification
(STANDARD)
ESC
-
n
[Name] Turn underline mode on/off
[Format] ASCII ESC
-
n
Hex 1B 2D n
Decimal 27 45 n
[Range] 0 ≤ n ≤ 2, 48 ≤ n ≤ 50
[Description] Turns underline mode on or off, based on the following values of n:
n
Function
0, 48 Turns off underline mode
1, 49 Turns on underline mode (1-dot thick)
2, 50 Turns on underline mode (2-dots thick)
[Details] • The printer can underline all characters (including right-side character spacing),
but cannot underline the space set by HT.
• The printer cannot underline 90° clockwise rotated characters and white/black
inverted characters.
• When underline mode is turned off by setting the value of n to 0 or 48, the
following data is not underlined, and the underline thickness set before the mode
is turned off does not change. The default underline thickness is 1 dot.
• Changing the character size does not affect the current underline thickness.
• Underline mode can also be turned on or off by using ESC !. Note, however, that
the last received command is effective.
• If slip paper is selected, the underline is printed with 1-dot thickness even if n is
specified as 2 or 50.
[Default] n = 0
[Reference] ESC !
ESC 2
[Name] Select default line spacing
[Format] ASCII ESC 2
Hex 1B 32
Decimal 27 50
[Description] Selects approximately 4.23 mm {1/6"} line spacing.
[Details] • The line spacing can be set independently in standard mode and in page mode.
• The line spacing is set to paper selected by ESC c 1.
[Reference] ESC 3, ESC c 1