Specifications

Confidential
SHEET
100
NO.
SHEET
REVISION
I
TITLE
NEXT
101
TM-H5000II
IIII
II series
Specification
(STANDARD)
• DLE ENQ 3 is ignored except when the printer is in the slip waiting state.
Therefore, be sure to use DLE EOT 5 to check whether slip paper is selected
and the printer is in the slip waiting state before executing DLE ENQ 3. After the
printer is released from the slip waiting state, the printer selects the paper roll.
• When the slip waiting status is cancelled with DLE ENQ 3, the receive and print
buffers are cleared.
• When the printer is disabled with ESC = (Select peripheral device), the error
recovery functions (DLE ENQ 1 and DLE ENQ 2) are enabled, and the other
functions are disabled.
[Notes] • The status is also transmitted whenever the data sequence <10>H<05>H<n> (1
≤ n ≤ 3) is received.
Example:
In ESC ∗
∗∗
∗ m n
L nH dk, d1 = <10>H, d2 = <05>H, d3 = <01>H
• This command should not be contained within another command that consists of
two or more bytes.
Example:
If you attempt to transmit ESC 3 n to the printer, but DTR (DSR for the host
computer) goes to MARK before n is transmitted, and DLE ENQ 2 interrupts
before n is received, the code <10>H for DLE ENQ 2 is processed as the
code for ESC 3 <10>H.
[Reference] DLE EOT