User`s manual

8 TM-C710 User’s Manual
English
Connecting the Interface Cable
WARNING:
Should a fault ever occur in the AC adapter, immediately turn off the power to
the printer and remove the AC cable from the outlet.
Unplug the power cable of the AC adapter from the outlet before you plug/
unplug the AC adapter into the printer.
CAUTION:
Direct connection to an aerial LAN cable located outside may cause induced
lightning to damage devices. When you use such cables, connect via devices
that protect against surges.
Do not plug an ordinary telephone line into the Ethernet connector.
1. Make sure the printer is turned off.
2. For the USB interface model, connect the USB cable to the connector, as
shown in illustration.
For the Ethernet interface model, connect the Ethernet cable to the connector
until it clicks..
3. Secure the cable with the hook.