User`s manual

6 TM-C710 User’s Manual
English
Power button
Press the Power button for 3 seconds or more to reset the printer. After the reset,
paper feeding and autocutting are performed.
Note:
For 30 seconds after a reset, the printer and host cannot communicate.
After resetting, the printer is in the same state as when the power is turned on.
Setup
Follow in order the steps below to set up the printer.
1. Installing the printer. (See page 7.)
2. Connecting the Interface Cable. (See page 8.)
3. Installing/Replacing the Roll Paper. (See page 9.)
4. Installing/Replacing the Ink Cartridge.(See page 11.)
5. Installing the printer driver. (See page 12.)