User`s manual

14 TM-C710 User’s Manual
English
Follow the steps below to perform head cleaning. (You can also use the printer
driver for head cleaning. For details, see the printer driver help.)
1. Turn on the printer.
2. Press the Cleaning button for 3 seconds or more.
Head cleaning starts, and the (Power) LED starts flashing. When
head cleaning finishes, the (Power) LED stays on.
CAUTION:
Do not do not turn off the printer or open the roll paper cover while the
(Power) LED is flashing.
Troubleshooting
Error LED on or flashing
❏ Check to see that the roll paper cover is closed. If it is open, close it.
❏ If the Replace Ink LED is on, replace the ink cartridge with a new one.
❏ When the Check Paper LED is on, check whether the roll paper is out. If it is
out, replace it with a new one.
❏ When the PAPER Jam LED is flashing, check for a paper jam. If paper is
jammed, Install the paper correctly referring to “Installing/Replacing the Roll
Paper” on page 9.
❏ Turn off the printer and then turn it back on. If the Error LED is still flashing,
call your supervisor or a service person.
Paper jam
Turn off the printer and open the roll paper cover to remove the jammed paper.
Install the paper correctly referring to “Installing/Replacing the Roll Paper” on
page 9.
Specifications
Printing method Serial ink jet, dot matrix
Four-color (CMYK) printing
Paper feed Forward direction feed
Print speed 130 mm/s {5.12"/s} (printing width: 53 mm, 360 dpi × 180 dpi)
100 mm/s {3.94"/s} (printing width: 53 mm, 360 dpi × 360 dpi)
90 mm/s {3.54"/s} (printing width: 53 mm, 720 dpi × 360 dpi)
Roll paper type Normal quality paper (single-ply)
Ink cartridge 4-color integrated exclusive ink cartridge
(Model: SJIC25P)
Interface USB [Compliance: USB 2.0, Communication speed: Full-
speed (12 Mbps)]/Ethernet (10BASE-T/100BASE-TX)
Power supply AC adapter, K (model: M248A) supply voltage: DC 42 V
Rated current: 1.0 A