User`s manual
TM-C710 User’s Manual 13
English
2. For a 32bit OS, double-click on the icon “c71d32_xxxx.exe.”
For a 64bit OS, double-click on the icon “c71d64_xxxx.exe.”
3. Complete the installation by following the instructions displayed.
For Ethernet Interface Model
1. Make sure the printer is turned on.
2. Set the IP address to the printer by using EPSON TMNet WinConfig.
3. Click [Start] - [Control Panel] - [Printer] (or [Printers and Faxes]).
4. From the menu, click [File] - [Add Printer].
5. Click [Add a local printer].
6. Select [Create a new port:], select [Standard TCP/IP Port] in “Type of
port,” and click [Next].
7. Set each item as described below:
• Device type: TCP/IP Device
• Hostname or IP address: IP address set for the printer
• Port name: The value set in [Hostname or IP address] is automatically
input.
•
Query the printer and automatically select the driver to use
:
Uncheck the checkbox.
8. Select [Standard] in “Device Type,” select [Generic Network Card], and
click [Next].
9. Click the [Cancel] button to close the window.
10. For a 32bit OS, double-click on the icon “c71d32_xxxx.exe.”
For a 64bit OS, double-click on the icon “c71d64_xxxx.exe.”
11. Complete the installation by following the instructions displayed.
Displaying the Printer Driver
Follow the steps below to display the printer driver.
1. Click [Start] - [Control Panel] - [Printer] (or [Printers and Faxes]).
2. Right-click on [EPSON TM-C710] and click [Printing Preferences].
For details on how to use the printer driver, see the printer driver help.
Cleaning
Cleaning the Printer Case
Be sure to turn off the printer, and wipe the dirt off the printer case with a dry
cloth or a damp cloth.
CAUTION:
Never clean the product with alcohol, benzine, thinner, or other such solvents.
Doing so may damage or break the parts made of plastic and rubber.
Cleaning the Print Head
Perform head cleaning only when the printout is faint or dots are missing.
CAUTION:
When ink is low, head cleaning may not start or may stop during cleaning. In
this case, head cleaning starts after a new ink cartridge is installed.