User`s manual
Table Of Contents
- Standards and Approvals
- Safety Precautions
- Caution Label
- Restriction of Use
- Downloading Drivers, Utilities, and Manuals
- Unpacking
- Part Names
- Setup
- Installing the Printer
- Connecting the AC Cable
- Installing/Replacing the Ink Cartridge
- Installing Paper
- Attaching/Adjusting the Paper Ejection Tray
- Installing the Driver and Connecting to the Computer
- Displaying the Printer Driver
- Setting DIP Switches
- Cleaning the Autocutter
- Head Cleaning
- Troubleshooting
- Operating Environment
- Specification
22 TM-C3400A User’s Manual
Paper jam
Turn off the printer and open the roll paper cover or the fanfold paper
cover to remove the jammed paper. Install the paper correctly
referring to
“Installing Paper” on page 10.
Operating Environment
Specification
OS Microsoft Windows 7 SP1 (32/64bit)
Microsoft Windows Vista SP2 (32/64bit)
Microsoft Windows XP SP2 (64bit)
Microsoft Windows XP SP3 (32bit)
Microsoft Windows Server 2008 R2 SP1
Microsoft Windows Server 2008 SP2 (32/64bit)
Microsoft Windows Server 2003 R2 SP2 (32/64bit)
Computers The printer supports the following computers that run the
above operating system.
•PC/AT-compatible
CPU Computers with a processor of 1 GHz or better are
recommended.
Intel/Pentium/Celeron series, AMD Athlon/Duron family,
or processors that are compatible with these are
recommended.
RAM 512 MB or larger is recommended.
HDD 250 MB
Printing method Serial ink jet, dot matrix
Three-color printing
Paper feed Forward and reverse friction feed
Autocutter Cutting method By separated-blade scissors
Cutting type Full cut (cuts paper completely)
Minimum cut length 15 mm {0.59”}
Print density 360 dpi 180 dpi, 360 dpi 360 dpi, 720 dpi 360 dpi
Print speed 92 mm/s (printing width: 56 mm, 360 dpi 180 dpi,
bi-directional printing)
82 mm/s (printing width: 72 mm, 360 dpi 180 dpi,
bi-directional printing)