User`s manual
Table Of Contents
- Standards and Approvals
- Safety Precautions
- Caution Label
- Restriction of Use
- Downloading Drivers, Utilities, and Manuals
- Unpacking
- Part Names
- Setup
- Installing the Printer
- Connecting the AC Cable
- Installing/Replacing the Ink Cartridge
- Installing Paper
- Attaching/Adjusting the Paper Ejection Tray
- Installing the Driver and Connecting to the Computer
- Displaying the Printer Driver
- Setting DIP Switches
- Cleaning the Autocutter
- Head Cleaning
- Troubleshooting
- Operating Environment
- Specification
14 TM-C3400A User’s Manual
3. Open the fanfold paper cover and unlock the fanfold paper guide.
4. Slide the fanfold paper guide to align it with the fanfold paper
width, and lock it.
➄ Turning on the printer and loading the paper
CAUTION:
Do not pull the paper from inside the printer by opening the roll paper
cover. Doing so may cause a paper jam or other printing failures.
1. Turn on the printer.
2. When the Power LED stays on after flashing, insert the paper with
the printable side up until it is automatically drawn in
(approximately 100 mm), and then the paper is fed automatically.