User`s manual
Table Of Contents
- Standards and Approvals
- Safety Precautions
- Caution Label
- Restriction of Use
- Downloading Drivers, Utilities, and Manuals
- Unpacking
- Part Names
- Setup
- Installing the Printer
- Connecting the AC Cable
- Installing/Replacing the Ink Cartridge
- Installing Paper
- Attaching/Adjusting the Paper Ejection Tray
- Installing the Driver and Connecting to the Computer
- Displaying the Printer Driver
- Setting DIP Switches
- Cleaning the Autocutter
- Head Cleaning
- Troubleshooting
- Operating Environment
- Specification
TM-C3400A User’s Manual 13
E
When Installing Fanfold Paper
➂ Attaching the paper feed guide
CAUTION:
The paper feed guide is attached in the default setting. If you have
removed the paper feed guide to use roll paper, be sure to attach the
paper feed guide before using fanfold paper.
1. Pull the release lever to open the roll paper cover.
2. Insert the paper feed guide into the grooves inside of the roll paper
cover to attach it.
3. Close the roll paper cover.
➃ Adjusting the guides
When using the printer for the first time, skip the following step 1 and
2, since the paper ejection guide is adjusted in the default setting.
1. Unlock the paper ejection guide, using the tip of a tool, such as a
pen.
2. Slide the paper ejection guide as wide as possible, and lock it.